Panabit Support Board!

 找回密码
 注册

QQ登录

只需一步,快速开始

查看: 13600|回复: 7

V8.07是否不支持4核CPU的主机?

[复制链接]
发表于 2008-8-6 22:41:16 | 显示全部楼层 |阅读模式
俺用的是Q6600(四核)CPU,升级到8.07以后,网卡会反复UP、DOWN。

俺该咋办呢?
发表于 2008-8-6 22:50:11 | 显示全部楼层
4核可以用,目前仅保证双核的稳定性。您所说的问题,不是4核CPU的问题,是网卡驱动问题,具体的是什么网卡芯片,是板载的还是外加的。
 楼主| 发表于 2008-8-7 10:57:28 | 显示全部楼层
谢谢time...
俺在BIOS中禁用了2nd CPU后,问题解决了。
按PANABIT提供的手册中说,超线程会导致网桥数据口失效,俺在BIOS中没发现超线程选项。

主板是泰安S5191,板载2个i82573V GE/1个i82551 FE。

另外,启用V8.07以后,PING出去的时延略微增加了一些(1~2ms),不知是否正常现象?
发表于 2008-8-7 12:55:44 | 显示全部楼层
82573是给我留下印象非常深刻的网卡之一。
主板芯片是什么?
 楼主| 发表于 2008-8-7 14:17:59 | 显示全部楼层
回楼上: intel Mukilteo-2 MCH/ICH7-E SB/PXH-V 64bit PCI HUB/SMSC SCH5027 Super I/O chip

照说明书抄的...呵呵.

请问: V8.07有没有可能增加网络延时,降低网络速率?   今天更新到8.07以后,底下反映打开网页慢多了, 也不知是否是宽带问题巧合了.
发表于 2008-8-7 16:11:20 | 显示全部楼层
我们的用户里目前为止只有你反映有这个问题。8.07只是修复了bug没对核心结构调整
 楼主| 发表于 2008-8-7 16:18:45 | 显示全部楼层
已经换回V8.01了,过几天重装FB后再试试。
 楼主| 发表于 2008-8-8 13:40:45 | 显示全部楼层
请版言帮忙分析一下:
..................................
ad0: 152627MB <Seagate ST3160815AS 3.AAD> at ata0-master SATA150
acd0: DVDROM <DVD-ROM DDU1642/VER CS07> at ata1-master UDMA33
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
Trying to mount root from ufs:/dev/ad0s1a
JOS initialized!
module_register: module pci/em already exists!
Module pci/em failed to register: 17
em0: promiscuous mode enabled
em0: link state changed to DOWN
em1: promiscuous mode enabled
em1: link state changed to DOWN
em0: link state changed to UP
em1: link state changed to UP
em1: watchdog timeout -- resetting
em1: link state changed to DOWN
em1: link state changed to UP
em1: promiscuous mode disabled
em0: promiscuous mode disabled
module_register: module pci/em already exists!
Module pci/em failed to register: 17
module_register: module pci/em already exists!
Module pci/em failed to register: 17
em0: promiscuous mode enabled
em0: link state changed to DOWN
em1: promiscuous mode enabled
em1: link state changed to DOWN
em0: link state changed to UP
em1: link state changed to UP
em1: watchdog timeout -- resetting
em1: link state changed to DOWN
em1: link state changed to UP
em1: promiscuous mode disabled
em0: promiscuous mode disabled
module_register: module pci/em already exists!
Module pci/em failed to register: 17
em0: promiscuous mode enabled
em0: link state changed to DOWN
em1: promiscuous mode enabled
em1: link state changed to DOWN
em0: link state changed to UP
em1: link state changed to UP
您需要登录后才可以回帖 登录 | 注册

本版积分规则

QQ|Archiver|手机版|小黑屋|北京派网软件有限公司 ( ICP备案序号:京ICP备14008283号 )

GMT+8, 2024-11-1 11:48 , Processed in 0.073780 second(s), 16 queries .

Powered by Discuz! X3.4

© 2001-2023 Discuz! Team.

快速回复 返回顶部 返回列表