X86 防火墙无VGA接口如何安装panabit
如题,X86平台,接512MB CF卡, 有Control接口,SecureCRT可以查看启动情况.试过用虚拟机安装在CF卡上,然后插进防火墙,无法启动!
请高手指点一下 很可能是设备名不对应。
1、插上CF卡，通过串口查看，注意查找关于CF卡的信息，看它在防火墙设备上被识别为什么？
2、比如识别为ad2；
3、虚拟机中mount CF卡，修改其中的/mnt/etc/fstab 和 /mnt/etc/rc.local两个文件，将其中相关部分全部修改为ad2；
4、插回防火墙，再启动看看。 BTX loader 1.00BTX version is 1.02
Consoles: internal video/keyboard
BIOS drive C: is disk0
BIOS 639kB/1039360kB available memory
FreeBSD/i386 bootstrap loader, Revision 1.1
(root@almeida.cse.buffalo.edu, Sat Nov 21 14:05:36 UTC 2009)
Loading /boot/defaults/loader.conf
/boot/kernel/kernel text=0x6070f4 data=0xb0f74+0x94384 syms=[0x4+0x6d3d0+0x4+0x9
577e]
/boot/kernel/if_em.ko text=0x49238 data=0xe44+0x69c syms=[0x4+0x3a20+0x4+0x532d-
]
\
Hit to boot immediately, or any other key for command prompt.
Booting in 1 second... 看不出来被识别成什么了，在bios里看是被识别为硬盘了！ Advanced
********************************************************************************
* Third IDE Master * Disabled: Disables LBA *
* *************************************************** * Mode. *
* Device :Hard Disk * Auto: Enables LBA *
* Vendor :SAMSUNG CF/ATA * Mode if the device *
* Size :521MB * supports it and the *
* LBA Mode:Supported * device is not already*
* Block Mode:Not Supported * formatted with LBA *
* PIO Mode:4 * Mode disabled. *
* Async DMA :MultiWord DMA-2 * *
* Ultra DMA :Not Supported * *
* S.M.A.R.T.:Not Supported * *
* *************************************************** * *
* LBA/Large Mode * ** Select Screen *
* Block (Multi-Sector Transfer) * ** Select Item ** PIO Mode * +- Change Option *
* DMA Mode * F1 General Help *
* S.M.A.R.T. * F10 Save and Exit *
* 32Bit Data Transfer * ESC Exit *
* * *
* * *
********************************************************************************
v02.58 (C)Copyright 1985-2004, American Megatrends, Inc. BIOS 谢谢,已经启动了, da0 改 ad0就好了
页:
[1]